PD (third-generation hatch, Korean-built for Australia, incl. late-2020 facelift)
OEM part no.: 95430-G3200, 95430-G3100, 81996-G8000 (blade), 81996-G3100 (blade), 81926-J9000 (blade roll pin)
Checked against tool makers' lists and key suppliers. We only change this date when the data has been rechecked against evidence, not for small edits. Spot something wrong? Use Report a data issue at the bottom of this page and we'll look again.
Key variant · 1 of 2
Key
Compatible tools
ConfirmedOBD port
Illustration — use it to know where to look.
RHD (Australian cars are right-hand drive): low on the driver's side of the dash, outboard of the steering column, next to the driver's right knee. The 16-pin socket sits in the same recess as the cabin fuse panel, behind the fuse panel cover, not out in the open footwell. Same position on every PD hatch trim (Go, Active, Elite, Premium, SR, N Line) and on the 2020 facelift. If you can't see it straight away, take the fuse cover off before you go hunting elsewhere.
Removable plastic fuse panel cover on the driver's side lower dash. Grip the edge and pull it towards you by hand, no tools or screws. The 16-pin connector is inside the recess with the fuse rows. If the tool gets no power from the socket, check the 7.5A MODULE 1 fuse in the same panel first, it feeds the data link connector.
Loading remaining details…