Keysolved

Ford Tourneo Custom OBD port location

On every UK and European Ford Tourneo Custom we cover, the OBD port is on the driver's side.

One generation, 2012–2019.

2012–2019

V362 (pre-facelift)

Illustration — use it to know where to look.

Location

RHD (UK): driver's footwell, directly under the steering column on its right-hand side, tucked between the column shroud and the knee trim panel and sitting just above the accelerator pedal. Crouch in the footwell and look up past the throttle pedal - the 16-pin socket faces down. Same position on Zetec, Titanium, Sport and Shuttle Bus and shared with the Transit Custom van it is built on. Camper and taxi conversions sometimes add trim under the dash, so check there first if it isn't where you expect.

How to access

Usually no cover - the socket is open under the column. On some vans a small plastic flap sits in front of it: hinge it down or pull it straight out by hand, no tools needed, and the connector is directly behind.

Also on this Tourneo Custom

  • KeysFlip remote
  • Tools confirmed16
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Open the full Tourneo Custom V362 record

For locksmiths

Doing this job for a customer?

Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Ford Tourneo Custom.

Subscribe

Questions

Ford Tourneo Custom OBD questions

V362 (2012–2019): RHD (UK): driver's footwell, directly under the steering column on its right-hand side, tucked between the column shroud and the knee trim panel and sitting just above the accelerator pedal.

Found the port. Now program the key.

Step-by-step add-key and all-keys-lost procedures for every Tourneo Custom, which of your tools will do it, and what catches people out.

Subscribe