NC (US 3-row long-wheelbase Santa Fe, DM platform; 2-row car of the same years is the separate Santa Fe Sport)
OEM part no.: 95430-4Z100, 95430-4Z101
Checked against tool makers' lists and key suppliers. We only change this date when the data has been rechecked against evidence, not for small edits. Spot something wrong? Use Report a data issue at the bottom of this page and we'll look again.
Key variant · 1 of 4
Key
Compatible tools
ConfirmedOBD port
Illustration — use it to know where to look.
Under the left side of the dash, by the driver's left knee, behind the fuse-panel cover in the lower dash panel to the left of the steering column (below the switch bank). The 16-pin connector cannot be seen until the cover is off. US cars are left-hand drive only; same position on SE, SE Ultimate, Limited and Limited Ultimate.
Pull the fuse-panel cover in the lower dash, left of the steering column, straight towards you. It is held by clips, no tools needed. The DLC sits behind it next to the fuses. If a lead or dongle stops the cover going back on, squeeze the two plastic tabs on the connector and push it back behind the panel so it hangs free.
Loading remaining details…