LW (Series I Aug 2011, German-built; Series II Aug 2012, Thai-built) and LZ facelift (Sep 2015-2018; LZ ST from late 2014, RS from 2016). Mk3 / C346, hatch and sedan
OEM part no.: AM5T-15K601-AD, AM5T-15K601-AE, AM5T-15K601-AF, Remote PCB Continental 5WK49986
Checked against tool makers' lists and key suppliers. We only change this date when the data has been rechecked against evidence, not for small edits. Spot something wrong? Use Report a data issue at the bottom of this page and we'll look again.
Key variant · 1 of 4
Key
Compatible tools
ConfirmedOBD port
Illustration — use it to know where to look.
Australian cars are right-hand drive: lower dash on the door side of the steering column (to the right of the column), behind the small pop-out coin cubby set into the panel below the light switch. The 16-pin socket sits in the back of that recess. Same place on hatch and sedan, LW and LZ, including ST and RS. ST and RS owners often unclip the socket and tuck it up behind the panel or fit a dummy connector, so if the recess is empty follow the loom up behind the lower dash.
Open the cubby, then squeeze both side walls together so it drops right down. The socket is behind it, no tools needed. The socket itself is held by two side clips: press them in to pull it forward if it has been pushed up out of sight.
Loading remaining details…