Keysolved

Nissan Rogue key battery

3rd gen (T33)

2021–2024
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Rogue 3rd gen key record

2nd gen (T32)

2014–2020
  • Flip remoteNot confirmed

    We haven't confirmed this one. Open the key and read the code on the old cell, then buy the same.

  • Smart keyNot confirmed

    We haven't confirmed this one. Open the key and read the code on the old cell, then buy the same.

Full Rogue 2nd gen key record

S35 (1st gen)

2008–2013
Full Rogue S35 key record

For locksmiths · 3rd gen

  • KeysSmart key
  • Tools confirmed14
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Rogue 3rd gen key record

Questions

Nissan Rogue key battery questions

3rd gen (2021–2024): CR2032 in the smart key. S35 (2008–2013): CR1620 in the remote head key; CR2025 in the smart key.

Also on Keysolved