Keysolved

Citroën C4 Picasso / Grand C4 Picasso key battery

Every Citroën C4 Picasso / Grand C4 Picasso remote key we cover, 2006–2013, takes one CR1620.

1st generation (UD / UA)

2006–2013
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR1620 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full C4 Picasso / Grand C4 Picasso 1st generation key record

For locksmiths · 1st generation

  • KeysFlip remote
  • Tools confirmed1
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull C4 Picasso / Grand C4 Picasso 1st generation key record

Questions

Citroën C4 Picasso / Grand C4 Picasso key battery questions

1st generation (2006–2013): CR1620 in the flip remote.

Also on Keysolved