Keysolved

Citroën Berlingo key battery

III

2018–2024
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Berlingo III key record

II (B9)

2008–2018
  • Flip remoteCR2032
  • Flip remoteCR1620
  • TransponderNo battery

    A key with no buttons has no battery. It starts the car using a chip that needs no power.

How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Berlingo II key record

For locksmiths · III

  • KeysFlip remote · Smart key
  • Tools confirmed4
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Berlingo III key record

Questions

Citroën Berlingo key battery questions

III (2018–2024): CR2032 in the flip remote and smart key. II (2008–2018): CR2032 in the flip remote; CR1620 in the flip remote.

Also on Keysolved