Audi A2 key battery
Every Audi A2 remote key we cover, 2000–2005, takes one CR2032.
8Z
2000–2005- Flip remoteCR2032
How to change a flip remote battery
- Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
For locksmiths · 8Z
Doing this job for a customer?
Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Audi A2.
- KeysFlip remote
- Tools confirmed6
- Transponder chipSubscribers
- Programming procedureSubscribers
Questions
Audi A2 key battery questions
8Z (2000–2005): CR2032 in the flip remote.
Got the battery. Now program the key.
Step-by-step add-key and all-keys-lost procedures for every A2, which of your tools will do it, and what catches people out.
Subscribe