C (K0) facelift - 'New Vivaro', 2024 on (Stellantis EMP2/K0; twin of Peugeot Expert III, Citroen Dispatch III, Toyota Proace, Fiat Scudo)
OEM part no.: 1693509480, 1693509380
Checked against tool makers' lists and key suppliers. We only change this date when the data has been rechecked against evidence, not for small edits. Spot something wrong? Use Report a data issue at the bottom of this page and we'll look again.
Key variant · 1 of 2
Key
Compatible tools
ConfirmedOBD port
Illustration — use it to know where to look.
RHD (UK): under the steering column, behind the plastic trim below the steering wheel on the door side. On UK vans the socket usually sits behind the small storage cubby to the right of the column, near your right knee; there is no separate OBD flap. LHD: lower dashboard left of the steering column, behind the large plastic cover under the wheel. Same position on panel van, Doublecab and platform cab, diesel and electric. The 2024 facelift brought a new dashboard. If the socket is not behind the cubby on a 2024-on van, check the rest of the trim under the column before you look anywhere else.
Open the small storage cubby to the right of the steering column. Squeeze its sides between your fingers and pull it straight out; no tools needed. The 16-pin socket is behind it. If your van has a full-width cover under the column instead, unclip it by hand from the bottom edge. Prop the cubby or cover clear so the lead is not strained while the tool runs.
Loading remaining details…