Keysolved

Toyota Proace OBD port location

On every UK and European Toyota Proace we cover, the OBD port is on the driver's side.

One generation, 2016–2026.

2016–2026

II

Illustration — use it to know where to look.

Location

RHD (UK): usually on the door side of the steering column, behind the small storage cubby / lower trim to the right of the column near your right knee, beside the cab fuse box. LHD: lower dashboard left of the steering column, behind the large plastic cover under the wheel, next to the fuses. Same position on panel van, crew cab and platform cab, diesel and electric. The 2024 facelift brought a new dashboard, so on a 2024-on van check all of the trim under the column if the socket is not behind the cubby.

How to access

RHD: open the small storage cubby to the right of the steering column, squeeze its sides and pull it straight out by hand; the 16-pin socket is behind it. LHD (or a van with a full-width cover): unclip the large plastic cover under the steering wheel by hand, pulling at the top left then the right. No tools needed.

Also on this Proace

  • KeysFlip remote · Smart key
  • Tools confirmed18
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Open the full Proace II record

For locksmiths

Doing this job for a customer?

Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Toyota Proace.

Subscribe

Questions

Toyota Proace OBD questions

II (2016–2026): RHD (UK): usually on the door side of the steering column, behind the small storage cubby / lower trim to the right of the column near your right knee, beside the cab fuse box.

Found the port. Now program the key.

Step-by-step add-key and all-keys-lost procedures for every Proace, which of your tools will do it, and what catches people out.

Subscribe