Renault Captur OBD port location

Location

Lower left dashboard area, above the pedals on the driver's side. The OBD-II 16-pin connector is located at the top left of the pedal area, above the footrest. On RHD UK models the port is on the right side of the steering column (still driver's side). The connector has a distinctive yellow colour on some variants. No cover panel on most trims — directly accessible. Consistent across all Captur II trims including E-Tech hybrid variants.

How to access

Look above the pedals on the driver's side, near the top-left of the pedal area. The 16-pin OBD-II connector is visible without removing any trim panels. On some trims a small plastic cover may need to be pulled down. No tools required.

Illustration — use it to know where to look.

Location

Phase 1 (2013–2017): Central console area, in a small covered compartment below the ignition button / start button on the driver's side, accessible by removing a small plastic cover. Some owner reports place it near the gear lever under a hinged flap — exact sub-position varies by source but confirmed within the central console area. Phase 2 (2017–2019 facelift): Passenger side, behind a plastic cover at the bottom of the glove box, between the glove compartment and the A-pillar. Port changed location at the 2017 facelift — always verify before connecting.