Fuso Canter OBD port location
One generation, 2016–2020.
2016–2020
8th generation
Illustration — use it to know where to look.
Location
May differ on UK right-hand-drive trucks: check on the truck before you quote. On left-hand-drive European Canters the 16-pin socket is usually on the passenger side, in the area of the cab fuse box behind the lower dash panel in front of the passenger seat. Some trucks have it in the driver's footwell instead, on the lower dash panel above the pedals or in the kick panel by the door pillar. On a UK truck, look first on the driver's side under the dash and in the kick panel, then pull the lower panel in front of the passenger seat (it unclips, no tools) and check round the fuse block.
How to access
If the socket is not exposed in the driver's footwell, it is behind the lower dash panel in front of the passenger seat. Pull the panel towards you to release its clips (no tools), then unclip the fuse box cover by pulling out its two locking tabs. Refit the panel by locating the clips in their slots first, then pushing it home.
Also on this Canter
- KeysTransponder
- Tools confirmed4
- Transponder chipSubscribers
- Programming procedureSubscribers
For locksmiths
Doing this job for a customer?
Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Fuso Canter.
SubscribeQuestions
Fuso Canter OBD questions
Found the port. Now program the key.
Step-by-step add-key and all-keys-lost procedures for every Canter, which of your tools will do it, and what catches people out.
Subscribe