8th generation (FEA/FEB/FEC, Euro VI, European-built)
OEM part no.: MK645741
Checked against tool makers' lists and key suppliers. We only change this date when the data has been rechecked against evidence, not for small edits. Spot something wrong? Use Report a data issue at the bottom of this page and we'll look again.
Key
Compatible tools
ConfirmedOBD port
Illustration — use it to know where to look.
May differ on UK right-hand-drive trucks: check on the truck before you quote. On left-hand-drive European Canters the 16-pin socket is usually on the passenger side, in the area of the cab fuse box behind the lower dash panel in front of the passenger seat. Some trucks have it in the driver's footwell instead, on the lower dash panel above the pedals or in the kick panel by the door pillar. On a UK truck, look first on the driver's side under the dash and in the kick panel, then pull the lower panel in front of the passenger seat (it unclips, no tools) and check round the fuse block.
If the socket is not exposed in the driver's footwell, it is behind the lower dash panel in front of the passenger seat. Pull the panel towards you to release its clips (no tools), then unclip the fuse box cover by pulling out its two locking tabs. Refit the panel by locating the clips in their slots first, then pushing it home.
Loading remaining details…