Keysolved

Toyota Land Cruiser Prado key battery

Every Toyota Land Cruiser Prado remote key we cover, 2009–2017, takes one CR1632.

J150

2009–2017
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR1632 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Land Cruiser Prado J150 key record

For locksmiths · J150

  • KeysSmart key
  • Tools confirmed26
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Land Cruiser Prado J150 key record

Questions

Toyota Land Cruiser Prado key battery questions

J150 (2009–2017): CR1632 in the smart key.

Also on Keysolved