Keysolved

Subaru Levorg key battery

Every Subaru Levorg remote key we cover, 2014–2020, takes one CR2032.

VM

2014–2020
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Levorg VM key record

For locksmiths · VM

  • KeysSmart key
  • Tools confirmed17
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Levorg VM key record

Questions

Subaru Levorg key battery questions

VM (2014–2020): CR2032 in the smart key.

Also on Keysolved