Scion xB key battery
Every Scion xB remote key we cover, 2004–2015, takes one CR2016.
2nd Gen
2008–2015- Fixed remoteCR2016
How to change a fixed remote battery
- Find the slot or screw on the edge or back of the remote. Undo the screw if there is one.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to open the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2016 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
1st Gen (NCP31)
2004–2006- TransponderCR2016
For locksmiths · 2nd Gen
- KeysFixed remote
- Tools confirmed5
- Transponder chipSubscribers
- Programming procedureSubscribers
Questions
Scion xB key battery questions
2nd Gen (2008–2015): CR2016 in the fixed remote. 1st Gen (2004–2006): CR2016 in the transponder.