Keysolved

Land Rover Discovery 2 key battery

Every Land Rover Discovery 2 remote key we cover, 1998–2004, takes one CR2032.

L318

1998–2004
How to change a fixed remote battery
  1. Find the slot or screw on the edge or back of the remote. Undo the screw if there is one.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to open the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Discovery 2 L318 key record

For locksmiths · L318

  • KeysFixed remote
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Discovery 2 L318 key record

Questions

Land Rover Discovery 2 key battery questions

L318 (1998–2004): CR2032 in the fixed remote.

Also on Keysolved