Kia Rondo key battery
Every Kia Rondo remote key we cover, 2007–2010, takes one CR2032.
UN
2007–2010- TransponderNo battery
A key with no buttons has no battery. It starts the car using a chip that needs no power.
- Fixed remoteCR2032
How to change a fixed remote battery
- Find the slot or screw on the edge or back of the remote. Undo the screw if there is one.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to open the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
For locksmiths · UN
Doing this job for a customer?
Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Kia Rondo.
- KeysTransponder · Fixed remote
- Tools confirmed6
- Transponder chipSubscribers
- Programming procedureSubscribers
Questions
Kia Rondo key battery questions
UN (2007–2010): CR2032 in the fixed remote.
Got the battery. Now program the key.
Step-by-step add-key and all-keys-lost procedures for every Rondo, which of your tools will do it, and what catches people out.
Subscribe