Keysolved

Jaguar E-Pace key battery

Every Jaguar E-Pace remote key we cover, 2017–2024, takes one CR2032.

X540

2017–2024
  • Smart keyCR2032
  • ProximityNo battery

    A key with no buttons has no battery. It starts the car using a chip that needs no power.

How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full E-Pace X540 key record

For locksmiths · X540

  • KeysSmart key · Proximity
  • Tools confirmed17
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull E-Pace X540 key record

Questions

Jaguar E-Pace key battery questions

X540 (2017–2024): CR2032 in the smart key.

Also on Keysolved