Keysolved

Cupra Formentor key battery

Every Cupra Formentor remote key we cover, 2020–2024, takes one CR2032.

KM

2020–2024
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Formentor KM key record

For locksmiths · KM

Doing this job for a customer?

Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Cupra Formentor.

  • KeysSmart key
  • Tools confirmed16
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Formentor KM key record

Questions

Cupra Formentor key battery questions

KM (2020–2024): CR2032 in the smart key.

Also on Keysolved

Got the battery. Now program the key.

Step-by-step add-key and all-keys-lost procedures for every Formentor, which of your tools will do it, and what catches people out.

Subscribe