Keysolved

Volvo V70 key battery

Every Volvo V70 remote key we cover, 2000–2007, takes one CR2032.

V70 II (P2, type 285)

2000–2007
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full V70 V70 II key record

For locksmiths · V70 II

Doing this job for a customer?

Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Volvo V70.

  • KeysTransponder · Flip remote
  • Tools confirmed22
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull V70 V70 II key record

Questions

Volvo V70 key battery questions

V70 II (2000–2007): CR2032 in the transponder and flip remote.

Got the battery. Now program the key.

Step-by-step add-key and all-keys-lost procedures for every V70, which of your tools will do it, and what catches people out.

Subscribe