Keysolved

Toyota iQ key battery

AJ10 / KJ10

2008–2015
  • Remote head keyCR2016
  • Smart keyNot confirmed

    We haven't confirmed this one. Open the key and read the code on the old cell, then buy the same.

How to change a remote head key battery
  1. Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2016 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full iQ AJ10 / KJ10 key record

For locksmiths · AJ10 / KJ10

Doing this job for a customer?

Get the transponder chip, the add-key and all-keys-lost procedures, and which of your tools will do it, for every Toyota iQ.

  • KeysRemote head key · Smart key
  • Tools confirmed7
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull iQ AJ10 / KJ10 key record

Questions

Toyota iQ key battery questions

AJ10 / KJ10 (2008–2015): CR2016 in the remote head key.

Also on Keysolved

Got the battery. Now program the key.

Step-by-step add-key and all-keys-lost procedures for every iQ, which of your tools will do it, and what catches people out.

Subscribe