Keysolved

Toyota HiAce key battery

Every Toyota HiAce remote key we cover, 2005–2019, takes one CR2016.

H200

2005–2019
How to change a remote head key battery
  1. Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2016 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full HiAce H200 key record

For locksmiths · H200

  • KeysRemote head key
  • Tools confirmed9
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull HiAce H200 key record

Questions

Toyota HiAce key battery questions

H200 (2005–2019): CR2016 in the remote head key.

Also on Keysolved