What battery does a Toyota Fortuner key take?

Toyota Fortuner key battery

2015–2023

How to change a flip remote battery

Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.

How to change a smart key battery

Slide the release catch and pull out the emergency key blade.
Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.

Questions

AN150/AN160 (2015–2023): CR2032 in the flip remote and smart key; CR1620 in the flip remote.