Keysolved

Suzuki Jimny key battery

Every Suzuki Jimny remote key we cover, 1998–2018, takes one CR1620.

3rd generation (JB43 / SN413)

1998–2018
  • TransponderNo battery

    A key with no buttons has no battery. It starts the car using a chip that needs no power.

  • Remote head keyCR1620
How to change a remote head key battery
  1. Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR1620 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Jimny 3rd generation key record

For locksmiths · 3rd generation

  • KeysTransponder · Remote head key
  • Tools confirmed3
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Jimny 3rd generation key record

Questions

Suzuki Jimny key battery questions

3rd generation (1998–2018): CR1620 in the remote head key.

Also on Keysolved