Keysolved

Skoda Kamiq key battery

Every Skoda Kamiq remote key we cover, 2019–2024, takes one CR2025.

NW4

2019–2024
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2025 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2025 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Kamiq NW4 key record

For locksmiths · NW4

  • KeysFlip remote · Smart key
  • Tools confirmed7
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Kamiq NW4 key record

Questions

Skoda Kamiq key battery questions

NW4 (2019–2024): CR2025 in the flip remote and smart key.