SEAT Exeo key battery
Every SEAT Exeo remote key we cover, 2008–2013, takes one CR2032.
Exeo saloon and ST estate
2008–2013- Flip remoteCR2032
How to change a flip remote battery
- Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
For locksmiths · Exeo saloon and ST estate
- KeysFlip remote
- Tools confirmed2
- Transponder chipSubscribers
- Programming procedureSubscribers
Questions
SEAT Exeo key battery questions
Exeo saloon and ST estate (2008–2013): CR2032 in the flip remote.