Keysolved

Peugeot 308 key battery

T9

2013–2021
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full 308 T9 key record

T7

2007–2013
  • Flip remoteCR1620 or CR2032

    Depends on the key. Match the shape of your key, or the code printed on the old cell.

  • Flip remoteCR2032
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR1620 or CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full 308 T7 key record

For locksmiths · T9

  • KeysFlip remote · Smart key
  • Tools confirmed5
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull 308 T9 key record

Questions

Peugeot 308 key battery questions

T9 (2013–2021): CR2032 in the flip remote and smart key. T7 (2007–2013): CR1620 or CR2032 in the flip remote; CR2032 in the flip remote.

Also on Keysolved