Keysolved

W907

2018–2024
How to change a remote head key battery
  1. Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Sprinter W907 key record

W906 NCV3

2014–2018
How to change a fixed remote battery
  1. Find the slot or screw on the edge or back of the remote. Undo the screw if there is one.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to open the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2025 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Sprinter W906 NCV3 key record

W906

2006–2018
Full Sprinter W906 key record

For locksmiths · W907

  • KeysRemote head key · Smart key
  • Tools confirmed6
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Sprinter W907 key record

Questions

Mercedes-Benz Sprinter key battery questions

W907 (2018–2024): CR2032 in the remote head key and smart key. W906 NCV3 (2014–2018): CR2025 in the fixed remote. W906 (2006–2018): CR2032 in the flip remote.