Jeep Commander key battery
Every Jeep Commander remote key we cover, 2006–2010, takes one CR2032.
XK
2006–2010- Remote head keyCR2032
- TransponderNo battery
A key with no buttons has no battery. It starts the car using a chip that needs no power.
- Fixed remoteCR2032
How to change a remote head key battery
- Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a fixed remote battery
- Find the slot or screw on the edge or back of the remote. Undo the screw if there is one.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to open the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
For locksmiths · XK
- KeysRemote head key · Transponder · Fixed remote
- Tools confirmed10
- Transponder chipSubscribers
- Programming procedureSubscribers
Questions
Jeep Commander key battery questions
XK (2006–2010): CR2032 in the remote head key and fixed remote.