Keysolved

Hyundai Veloster key battery

Every Hyundai Veloster remote key we cover, 2011–2018, takes one CR2032.

1st generation (FS)

2011–2018
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Veloster 1st generation key record

For locksmiths · 1st generation

  • KeysSmart key
  • Tools confirmed4
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Veloster 1st generation key record

Questions

Hyundai Veloster key battery questions

1st generation (2011–2018): CR2032 in the smart key.

Also on Keysolved