Keysolved

Ford Expedition key battery

Gen 4 (U553)

2018–2024
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Expedition Gen 4 key record

Gen 3 (U553)

2007–2017
How to change a remote head key battery
  1. Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a smart key battery
  1. Slide the release catch and pull out the emergency key blade.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full Expedition Gen 3 key record

For locksmiths · Gen 4

  • KeysFlip remote · Smart key
  • Tools confirmed3
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull Expedition Gen 4 key record

Questions

Ford Expedition key battery questions

Gen 4 (2018–2024): CR2032 in the flip remote and smart key; CR2450 in the smart key. Gen 3 (2007–2017): CR2032 in the remote head key and smart key.

Also on Keysolved