Ford Escape key battery
4th gen
2020–2024How to change a smart key battery
- Slide the release catch and pull out the emergency key blade.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2450 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a flip remote battery
- Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
3rd gen
2013–2019How to change a remote head key battery
- Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
How to change a smart key battery
- Slide the release catch and pull out the emergency key blade.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot the blade leaves and twist gently to part the case. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
1st gen
2001–2012- TransponderNo battery
A key with no buttons has no battery. It starts the car using a chip that needs no power.
- Remote head keyCR2032
For locksmiths · 4th gen
- KeysSmart key · Flip remote
- Tools confirmed5
- Transponder chipSubscribers
- Programming procedureSubscribers
Questions
Ford Escape key battery questions
4th gen (2020–2024): CR2450 in the smart key; CR2032 in the flip remote. 3rd gen (2013–2019): CR2032 in the remote head key and smart key. 1st gen (2001–2012): CR2032 in the remote head key.