Chrysler Town & Country key battery
Every Chrysler Town & Country remote key we cover, 2008–2016, takes one CR2032.
5th generation (RT)
2008–2016- Remote head keyCR2032
How to change a remote head key battery
- Look for a small screw or a slot along the seam of the plastic head. Undo the screw if there is one.
- Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the head. Keep it off the circuit board and contacts.
- Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
- Fit a new CR2032 the same way up, holding it by the edges. Leave any grease on the contacts.
- Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
- Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
For locksmiths · 5th generation
- KeysRemote head key
- Tools confirmed3
- Transponder chipSubscribers
- Programming procedureSubscribers
Questions
Chrysler Town & Country key battery questions
5th generation (2008–2016): CR2032 in the remote head key.