Keysolved

Acura TSX key battery

2nd Gen (CU2)

2009–2014
How to change a flip remote battery
  1. Fold the blade in. On many flip keys the remote section unclips from the blade section, so look for a small slot along the seam.
  2. Wrap the tip of a small flat screwdriver in tape or a cloth, put it in the slot and twist gently to part the case. Keep it off the circuit board and contacts.
  3. Note which way up the old cell sits before you lift it out. It varies by key, so don't assume + is up.
  4. Fit a new CR1616 the same way up, holding it by the edges. Leave any grease on the contacts.
  5. Clip the case back together and test the buttons at the car. Most keys work straight away with no reprogramming.
  6. Keep new and old cells away from children. A swallowed button battery can cause serious injury within two hours.
Full TSX 2nd Gen key record

1st Gen (CL9)

2004–2008
Full TSX 1st Gen key record

For locksmiths · 2nd Gen

  • KeysFlip remote
  • Tools confirmed5
  • Transponder chipSubscribers
  • Programming procedureSubscribers
Subscribe for the full recordFull TSX 2nd Gen key record

Questions

Acura TSX key battery questions

2nd Gen (2009–2014): CR1616 in the flip remote. 1st Gen (2004–2008): CR2025 in the transponder.

Also on Keysolved