Keysolved

Take stock off after a job

Use the Done this job? card on a vehicle page to tick what you used and take it off your stock, and see what you've got for a key before you go.

Updated Beta

This is a beta feature. It isn't on every account yet, and it may change as we hear how it works for you. If you'd like to try it, get in touch.

On the vehicle page, open the Done this job? card under the programming steps. Tick what you used, set how many, and tap Confirm. It comes off your stock and the job goes in History, where you can undo it.

Both of these show only when Stock is on for your account. See what Stock is.

Before the job: what you've got

Open the vehicle and pick the key. Under the key details you'll see:

  • In stock: what you carry for this key, with a Low badge on anything running low.
  • Missing: how many suggested items you don't have. Tap it to see the list.

If you switch key, both update. If you haven't loaded any stock yet, you'll see "Track your stock to see what you've got for this key" instead, which takes you to Stock.

After the job: take it off

  1. On the same vehicle page, with the same key picked, tap Done this job? to open it. It's under the programming steps. If you've got anything for this key, it shows how many items are in stock.
  2. The best matches for this key are listed first, grouped as remotes and fobs, blades, transponders and chips, shells and cases, and locks and parts. Each says "Fits this key" and how many you have.
  3. Tick what you used. Nothing is ticked to start with.
  4. Set how many with − and +.
  5. Can't see it? Use the search box ("Search suggestions and your stock"), tap Show items not in stock, or tap + Add something else to pick from everything in your stock.
  6. Check the bar at the bottom: it says how many items are ticked.
  7. Tap Confirm.

You'll see "Job logged — stock updated" with an Undo button.

If you used more than you had, you'll see "You used more than you had of …". The count stops at 0, the job is still logged, and it's worth recounting that item. See edit stock items.

Put it right

Tap Undo on the message straight after. Later, open History, tap the job (it's named after the vehicle) and tap Undo. It puts back exactly what was taken off. See stock history and undo.

Good to know

  • You need a signal to log a job. There's no offline queue, so if it fails, tap Confirm again when you're back in range.
  • Logging a job doesn't change Last adjusted on the item. That date is for counts you change by hand.
  • Keep your counts right and the Low flags stay right too. See low-stock alerts.

FAQ

Common questions

Tap Undo on the message straight after. Later, open History on the Stock page, tap the job and tap Undo. It puts back exactly what was taken off.

Still stuck?

Tell us what you were trying to do and what happened. Include the vehicle or the page if it's about one. We read every message.