Keysolved

Look up a reg from a photo of the plate

Subscribers can tap the camera next to the Registration box, snap the plate and go straight to the lookup. Up to 10 photo lookups a day.

Updated

On reg lookup, tap the camera button next to the Registration box, take a photo of the plate, and Keysolved reads it and runs the lookup for you. Photo lookup is for subscribers, up to 10 a day. Typing the plate in works for everyone.

Use the camera

  1. Open reg lookup.
  2. Tap the camera button at the end of the Registration box.
  3. Take a photo of the plate.
  4. Keysolved fills in the reg and runs the lookup straight away.
  5. Check the reg it read before you trust the result.

Getting a clean read

  • Fill most of the frame with the plate.
  • Shoot straight on, not at a steep angle.
  • Wipe off dirt or road spray if you can, and avoid glare from the sun or a torch.

If it doesn't work

  • "Couldn't read the plate. Try a clearer photo, or type the reg in." Take another photo closer up, or type it.
  • "You've used all your camera lookups for today." You've had your 10 for the day. Type the reg in, or try the camera again tomorrow.
  • "Something went wrong. Try typing the reg in." Type the plate into Registration and tap Look up.
  • The camera is greyed out and says "Subscribe to snap a photo of the plate instead of typing it." You're not subscribed, or you're signed out. See why a page says Subscribers only.

Photo lookup reads UK plates only, like the typed lookup. For everything else about results, see looking up a UK registration.

FAQ

Common questions

Photo lookup is for subscribers. Typing the plate in works for everyone and runs the same lookup.

Still stuck?

Tell us what you were trying to do and what happened. Include the vehicle or the page if it's about one. We read every message.